Product Description
Function
A 1.8m x 1.2m Pedestrian Palisade Gate should be used as an access point for pedestrians who need to enter your site. Possessing a width of 1.2m, this Palisade Gate must only be used for pedestrian traffic as it is not wide enough for any type of vehicle to pass through safely. When this gate is not in use it is secured with a sliding latch bolt, where it effectively merges into the Palisade Security Fencing to form a continuous structure.
Due to its height of 1.8 metres, this type of Palisade Gate is most suitable for locations that do not have a high security risk. You may install this gate into Palisade Fencing systems which have been constructed on either soft grounds such as grass; or hard grounds like concrete – you will just need to ensure that you select the right type of Posts for your Palisade Fencing system. You may also fix a 1.8m x 1.2m Palisade Gate into a security fencing structure that has been built on either level or sloping ground, as the gate’s pales and rails can be assembled to run in line with the ground below. However, this will require a custom hinge, and should be discussed with our fabrication department.
Please Note: Images are for illustrative purposes, all products may vary slightly.
Gate Height : This is the height from the ground to the top of the Palisade and will include a small amount of clearance at the bottom to allow the gate to open. Also the gate posts will be longer to allow for digging and concreting into the ground unless you choose the base plated option.
Gate Width : As standard all our stated gate widths above are the width of the actual gate frame not including the post or hinge. If you require a different gate width then please call us as we can make any non standard gate you need.
Gate Hang : The hang of the gate is only applicable to single leaf gates and we always say the hang is the side the hinge is on when you are stood outside the gate looking in.
Post Type : You can choose Dig in or base plated. As standard all our gates are dig in. If you choose the base plated option then the posts will be cut and base plated. N.B. We can supply base plated bolts but these are an extra.
Powder Coating your Gate : Our standard powder coating colours on in the option box but you can choose any Ral colour you like. When you place your order one of our team will contact you to get your chosen RAL colour and advise you on our current timescales for our powder coating.
