Product Description
This 1.8m x 5.0m Single Leaf Palisade Gate may be used as a vehicle access point within a Palisade Fencing system. Suitable for small vehicles like forklifts and cars, this Palisade Gate allows vehicles to pass in and out of your site, as well as securing your location when staff are not present. You can secure the Palisade Gate with the sliding bolt and drop bolt supplied in your kit, or alternatively you may use a Heavy Duty Padlock to provide your security fencing and Palisade Gate with greater protection. At 1.8m high, this Palisade Gate may be used for locations that do not have any major risks to their security.
Offering a great amount of strength and security, this Palisade Gate is extremely dependable and can be assembled in a range of locations. If you decide to construct your security fencing and Palisade Gate on softer ground like grass, you will need to use Dig-In Posts and then set them using Postfix cement. However, if you plan to construct your Palisade Gate on harder ground such as concrete, you will require Bolt Down Posts.
Please Note: Images are for illustrative purposes, all products may vary slightly.
Gate Height : This is the height from the ground to the top of the Palisade and will include a small amount of clearance at the bottom to allow the gate to open. Also the gate posts will be longer to allow for digging and concreting into the ground unless you choose the base plated option.
Gate Width : As standard all our stated gate widths above are the width of the actual gate frame not including the post or hinge. If you require a different gate width then please call us as we can make any non standard gate you need.
Gate Hang : The hang of the gate is only applicable to single leaf gates and we always say the hang is the side the hinge is on when you are stood outside the gate looking in.
Post Type : You can choose Dig in or base plated. As standard all our gates are dig in. If you choose the base plated option then the posts will be cut and base plated. N.B. We can supply base plated bolts but these are an extra.
Powder Coating your Gate : Our standard powder coating colours on in the option box but you can choose any Ral colour you like. When you place your order one of our team will contact you to get your chosen RAL colour and advise you on our current timescales for our powder coating.
